OUR PRODUCTS
Pump
- High Level Of Hydraulic Efficiency Due To Optimized Flow Geometry And High Surface Finish
- Impellers Are Made Of Highly Abrasion Resistant Stainless Steel Material.
- Wider Operating Range.
- Water Lubricated Bearing Provided At Each Stage
Motor
- Motor Is Designed For Wide Voltage Fluctuations. (Three Phase : 300-440v, 50hz)
- Motor Is Ip-58 Protected
- Shaft Extension Connecting Spigot As Per Standard.
- Fitted With High Quality Mechanical Seal. Specially Designed Sand Protection Arrangement.
- High Quality Carbon Thrust Bearing For Longer Life.
- Rotor Surface Is Coated For Wear Resistance
- Rotating Parts Are Treated For Anti-corrosion.
- Rotating Parts Are Dynamically Balanced.
- Designed For High Starting Torque Characteristics.
- Class 'B' Insulation
Head | Upto 450m |
Discharge | Upto 6800 LPM |
Power Rating | Upto 250Hp/186Kw |
No. Of Stages | 15 |
Voltage Range | 340V- 440V, 50Hz, Three phase AC Power supply |
Speed | 2900 RPM |
Motor Type | Water filled water cooled Induction motor |
Max.Sand Contents | 50g/m3 |
Temperature | 40°C |
- Irrigation systems for Agriculture including Drip and Sprinkler systems.
- Pressure boosting applications
- Rural water Supply
- Domestic water supply to large residences and multi storied apartments
- Fire Fighting Systems
- Water supply to commercial establishments like Hotels, Lodges and Hospitals
- Dewatering of mines
- Industrial water supply
Pump Bracket | Grey Iron |
Pump Shaft | Stainless Steel |
Bowl | Grey Iron |
Impeller | Stainless Steel |
NRV Body | Grey Iron |
Sand Slinger | Grey Iron |
Seal Housing | Nitrile Rubber |
Mechanical Seal | Grey Iron |
Upper Housing | Carbon/ceramic Face |
Rotor Shaft | Stainless Steel |
Stator Body | Stainless Steel |
End Ring | Carbon Steel |
Lower Housing | Grey Iron |
Thrust Bearing Base | Grey Iron |
Motor Base | Grey Iron |
Diaphragm | Nitrile Rubber |
Fasteners | Stainless Steel |