OUR PRODUCTS
Pump
- High Level Of Hydraulic Efficiency Due To Optimized Flow Geometry And High Surface Finish.
- Impellers Are Made Of Highly Abrasion Resistant Stainless Steel Material.
- Wider Operating Range.
- Water Lubricated Bearing Provided At Each Stage
Motor
- Motor Is Designed For Wide Voltage Fluctuations. (Three Phase : 300-440v, 50hz)
- Motor Is Ip-58 Protected
- Shaft Extension Connecting Spigot As Per 'NEMA' Standard.
- Fitted With High Quality Mechanical Seal. Specially Designed Sand Protection Arrangement
- High Quality Carbon Thrust Bearing For Longer Life.
- Rotor Surface Is Coated For Wear Resistance.
- Rotating Parts Are Treated For Anti-corrosion.
- Rotating Parts Are Dynamically Balanced.
- Designed For High Starting Torque Characteristics.
- Class 'B' Insulation
| Head | Upto 270m |
| Discharge | Upto 1600 LPM |
| Power Rating | Upto 40Hp/30Kw |
| No. Of Stages | 25 |
| Voltage Range | 340V- 440V, 50Hz, Three phase AC Power supply |
| Speed | 2900 RPM |
| Motor Type | Water filled water cooled Induction motor |
| Max.Sand Contents | 50g/m3 |
| Temperature | 40°C |
- Irrigation systems for Agriculture including Drip and Sprinkler systems.
- Pressure boosting applications
- Rural water Supply
- Domestic water supply to large residences and multi storied apartments
- Fire Fighting Systems
- Water supply to commercial establishments like Hotels, Lodges and Hospitals
- Dewatering of mines
- Industrial water supply
| Pump Bracket | Grey Iron |
| Pump Shaft | Stainless Steel |
| Bowl | Grey Iron |
| Impeller | Stainless Steel |
| NRV Body | Grey Iron |
| Sand Slinger | Nitrile Rubber |
| Seal Housing | Grey Iron |
| Mechanical Seal | Carbon/ceramic Face |
| Upper Housing | Grey Iron |
| Rotor Shaft | Stainless Steel |
| Stator Body | Stainless Steel |
| End Ring | Carbon Steel |
| Lower Housing | Grey Iron |
| Thrust Bearing Base | Grey Iron |
| Motor Base | Grey Iron |
| Diaphragm | Nitrile Rubber |
| Fasteners | Stainless Steel |
| Coupling | Stainless Steel |